Hioki LR8432-20, Инструкция по эксплуатации

Страница: 74 / 238

3.5 Display Settings
66
Configure how each channel is displayed, as needed. These settings can be
changed on the Waveform/Numerical screen after measurement.
A waveform display color can be set for each input channel. The color can be
changed in
[CH] , [Range] , and Waveform/Numerical screen. It can be
changed even during measurement in the Waveform/Numerical screen.
The vertical display range and zero position
can be specified for each channel.
The magnification setting determines the
displayed range. Waveforms are expanded
or compressed vertically relative to the cen-
ter of the screen.
Magnification and zero-position settings are
ignored when the display range is defined
by upper and lower limits.
In the 1-5V range of a voltage measure-
ment and in integration measurement,
[Position] cannot be specified.
3.5 Display Settings
Selecting Waveform Display Color
Select from the waveform display color set-
ting options.
Setting options: Off ( x ) , 24-color
Specifying Vertical Display Range by Magnification and Zero
Position (vertical axis expansion/compression)
Zero Position: 50% 25%
0 V
100%
0%
50%
0 V 25%
Normal Display
Magnified
Display (x2)