Hioki LR8432-20, Инструкция по эксплуатации

Страница: 152 / 238

7.3 Performing Waveform Calculation
144
Set the display method for waveform calculation channels as necessary.
The display method can be changed even after measurement.
A waveform display color can be set for each waveform calculation channel.
Select a display format for waveform calculation results.
Set the display range in the
vertical axis direction using
upper/lower limit values.
Setting the Waveform Display Color
Select from the waveform display color setting
options.
Setting options: OFF (x), 24 colors
Setting the Display Format
Select from the
[Format]
setting options.
Setting options: (* default setting)
SI * Displays calculation results with a unit prefix (k, m,
etc.).
Dec Displays calculation results with a decimal.
Exp Displays calculation results in an exponential format.
Setting the Display Range in the Vertical Axis Direction Using
Upper/Lower Limit Values
10
-10
0
5
-5
0
1
Select the upper limit value for the display in
[Upper] .
2
Set the lower limit value for the display in
[Lower] in the same way. (Initial settings:
Upper limit 0.005, lower limit: 0.005)
The setting range for the upper/lower limit values is set to a sig-
nificant figure of 5 decimal places as below.
-9.9999E + 19
≤ Setting value ≤ -1.0000E - 19, setting value = 0
+1.0000E -19 ≤ Setting value ≤ +9.9999 + 19