Hioki LR8432-20, Инструкция по эксплуатации

Страница: 4 / 238

Contents
ii
Chapter 3
Setting before Measurement_______________ 43
3.1 Pre-Operation Inspection ....................................... 43
3.2 Operating Flow Overview ....................................... 44
3.3 Setting Configuration 1 – Recording Settings ..... 48

Specify the Recording Interval ......................................... 48

Setting the Display Time Base
(horizontal axis magnification, set as needed) ................. 49

Selecting the Recording Start/stop Method ..................... 51

Set the Recording Length for Repeated or
One-time Recording ......................................................... 52

Enable Digital Filtering (noise suppression) (as needed) 52

Automatic Saving ............................................................. 53

Replacing Removable Storage During Real-Time Saving 55
3.4 Setting Configuration 2 – Input Channel Settings 56

Voltage Measurement Settings ........................................ 58

Temperature Measurement Settings ............................... 59

Heat Flow Measurement Settings .................................... 61

Integration (Count) Measurement Settings ...................... 63

Revolution Measurement Settings ................................... 64
3.5 Display Settings ...................................................... 66

Selecting Waveform Display Color .................................. 66

Specifying Vertical Display Range by Magnification and
Zero Position (vertical axis expansion/compression) ....... 66

Specifying the Vertical Display Range by Upper and
Lower Limits (expansion/compression) ............................ 67

Converting Units (Scaling function) .................................. 69
3.6 Entering Comments ................................................ 72
3.7 Viewing All Channel Settings in a List .................. 74

Switching Channel Display Settings ................................ 75

Batch Copying Channel Settings ..................................... 76

Batch Setting Waveform Display/Hide and
Waveform Color Settings for All Channels ....................... 77

Initializing Settings (to factory defaults) ........................... 77

Aligning Zero Positions on the Grid ................................. 78

Display Celsius (°C) temperature values as Fahrenheit (°F)
.......................................................................................... 79