Hioki LR8432-20, Инструкция по эксплуатации

Страница: 77 / 238

3.5 Display Settings
69
3
3
C
h
apt
er 3
Set
ting
be
fo
re M
easurement
Use the scaling function to convert input
voltage to the physical units of the measure-
ment parameter for display, such to convert
voltage input for display as electrical current.
Converted values can be displayed in fixed-
or floating-point notation.
Setting Analog Channel or Pulse Channel (Revolution) Scaling
Converting Units (Scaling function)
Normal Display
(Off)
Scaling Enabled
A mV
1
For the
[Cond]
(condition) setting, select the
desired numerical notation.
Setting options:(
∗
default setting)
2
Move to the next item to the right, and
select the scaling method.
Setting options:(
∗
default setting)
3
Enter the
[Unit]
name on the comment entry
screen.
Refer to “3.6 Entering Comments” (p. 72).
4
Ratio:
Enter the conversion ratio and offset.
2-pt:
Enter the values at two points before
and after conversion.
Dec Displays converted values using fixed-point
notation
Exp Displays converted values using floating-
point notation
Off* Scaling is disabled.
Ratio* Convert by specifying the ratio of physical
units per volt of input signal (conversion ra-
tio), offset, and the name of the units.
2-pt Convert by specifying the input signal volt-
age at two points, the physical unit values at
those points, and the name of the units.
1 2 3
Conversion Ratio Setting
Conversion Ratio Setting
2-Point Setting
2-Point Setting
[Cond: Exp]
[Cond: Dec]
4
Scaling (voltage [V] to heat flow [W/m
2
]) is automatically set when
the sensitivity constant is set during heat flow measurement. (p.
61 )