Hioki LR8432-20, Инструкция по эксплуатации

Страница: 118 / 238

6.1 About Saving and Loading Data
110
*5. When opening a CSV file in a spreadsheet program, note that the number of rows that
can be loaded at one time is limited (p. A7)
.
When an option other than [Separator: Comma] has been selected on the [System]
screen, the file extension will be .TXT rather than .CSV.
*6. When files are saved for each calculation, (_Number) is added to the end of the file name
(MEAS0001_1.CSV, MEAS0001_2.CSV, etc.).
Depending on file size and CF card or USB flash drive capacity, each folder can store over
1,000 files. However, the file screen display is limited to a maximum of 1,000 files. Also, as
more files are created, more time is needed to start and stop recording. We recommend
setting measurement criteria so that the number of saved files stays below 1,000 whenever
possible.
Directory Structure for Saved Data
HIOKI_LR8432
CONF0001.SET
WAVE0001.MEM
(Settings data folder)
CONFIG
(Waveform data folder)
DATA
MEASUREMENT
WAVE0001.CSV
PICTURE
(Numerical calculation
results folder)
(Screen image folder)
15-07-01
(the folder name is the
date of file creation)
SCR00001.BMP
ALL
PART
(When [Split Calc.] is
enabled (
[On] ), re-
sults for each split
time)
MEAS0001.CSV
(Calculation results from
the start of the measure-
ment until its stop)
When [Split Calc.] is en-
abled ( [On] ), both the
folders “ALL” and
“PART” are created. Cal-
culation results from the
measurement start until
its stop and results for
each split time are stored
in these folders, respec-
tively.
MEAS0001_1.CSV
MEAS0001_2.CSV
MEAS0001.CSV
A file created for auto-
matic numbering, not
containing any data