Hioki LR8432-20, Инструкция по эксплуатации

Страница: 64 / 238

3.4 Setting Configuration 2 – Input Channel Settings
56
Configure the input channel settings on the [CH] screen. You can make these
settings while viewing input signal amplitude on the level monitor.
There are two general types of input signals, analog channels CH1 – CH10
and pulse channels P1 to P4. The analog channels can be used to measure
voltage, temperature (with thermocouples), and heat flow, and the pulse chan-
nels can be used for pulse counting (integration) and revolution measurement.
Settings can be changed while viewing all channel settings on the [Range] ,
[Conv/Calc] , [Trig & Alm] , and [Comment] screens.
In this example, settings are made on the [CH] screen while viewing the level
monitor.
You can specify recording criteria with the input settings to control recording,
or to output alarm signals. Refer to “Chapter 4 Specifying Criteria for Measure-
ments (Triggering, Alarm and Timer)” (p. 81). for details.
3.4 Setting Configuration 2 – Input Channel
Settings
Analog channels Pulse channels
“Voltage Measurement Settings” (p. 58).
“Integration (Count) Measurement Settings”
(p. 63).
“Temperature Measurement Settings” (p.
59).
“Revolution Measurement Settings” (p. 64).
“Heat Flow Measurement Settings” (p. 61).