Page | 62
The first Digi Channel will be
shown, once you have
checked this is correct, press
the
key to move to the
next. To change this channel
please see page 38 for the
output types. All default
values are shown on page 59.
Once you have completed all
the Digi Channels, ‘Program
Digi Channels will be
displayed’. Press the
key.
‘Setup GPRS’ will be displayed
(this is for future use), ignore
this menu and press
‘Advanced SMS Details’ will be
displayed and Press the
key.
Prefix Tel No
If a prefix number is needed
(e.g. “9”) in order for InSite
to dial the EURO 280 system,
this must be entered here.
Press the
key
3 Way Calling
Enter
: for No
Enter
: for Yes
This will apply to both
Downloading and Digi
signalling. Only available if
the facility is enabled on the
telephone line. Press the
key. You will be returned
to the Engineer Menu.
4.1.63 Programming Contact iD, SIA, SMS, WebWayOne and Chiron
The Contact iD, SIA and SMS signalling protocol can also be used. However the programming
differs from Fast Format, here you have to select the content types you would like to be sent
to the Alarm Receiving Centre. The table below shows the types you may use.
Content Types
1
Set:
System Set, Secure set system, System rearm, System Final Set,
2
Unset:
System Unset, System unset by Autoset, Autoset cancelled by a user, Forced Set, set by
Autoset
3
Special Unset:
Special Unset, Access Exit Requested
4
Set Fail:
Set Failure, Set Failure with input
5
Alarms:
Case/SAB Tamper, Power Fault, Fire Input Active, Day Alarm Input Active, Intruder Input
Active, Radio Low Battery, Fire Key Pressed, Burglary Alarm, Gas Alarm, Tamper Alarm, CCTV,
Tamper on Input, Entry/Exit Alarm, No Input Activity Sent, Day Alarm, Perimeter, Interior Alarm
6
First Alarm:
Burglary Alarm Once, Gas Alarm Once, Tamper Alarm Once, Entry/Exit Alarm Once,
Day Alarm Once, Interior Alarm Once,
7
Alarm Silenced
8
Confirmed:
Confirmed Signal
9
Lo Tech Faults:
STU Telecom Line OK, CCTV Line Fail, CCTV Line OK, Telecom Line OK,
10
High Tech Faults:
Any faults from Mains, Battery, Communications, Fuses, Device Fail Restored,
Digi Fail Comms, STU Comms Failure, Detector Fault, Detector Masked, Telecom Line Fault,