HIKVISION Pyronix EURO 280 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 72

HIKVISION Pyronix EURO 280 Скачать руководство пользователя страница 32

Page | 32

Exit Modes

Using the



and



keys, scroll to

‘EXIT MODES?

’

Press the



key

Area Exit Modes

Enter



: for

Timed.

Enter



: for

Final Door

Enter



: for

Timed/Final

Enter



: for

Push To Set

Press the



key. Repeat for each

Area or press the



key to return to

the Engineer Menu.

Change Codes (Duress/Guard Only)

All codes may be 4, 5, or 6 digit or proximity tags. Using a 5 or 6 digit code will automatically

block several possible 4 digit codes that clash with it. Please note that the EURO System will
only comply with Grade 3 if you have “5 digit codes” enabled.

NOTES: Only Duress, Master

Manager and Guard codes can be changed by the Engineer, Normal user codes and
keyfobs can only be changed in the Manager User Menus. The Master Manager and

Engineer Codes cannot be deleted.

4.1.29 Code Types and Numbers.

Alarm System

User/Manager Codes

Wireless Keyfobs

Duress/Guard Codes

EURO 280

500

32

20

4.1.30 Wireless Keyfobs

Wireless keyfobs can only be programmed from the Master Manager Menu, and can only be
learnt to the system if a wireless ZEM is installed.

4.1.31 Code Types

User Type

Functions

Operation

User

Default: 1234

Set and Unset System. Also for Access Control

and Sub Area Control functions

Programmed by

Manager only.

Manager

Set and Unset System
Also access to Manager menu functions

Programmed by
Manager only.

Master Manager

Default: 2222

Set and Unset System.
Also access to Manager menu functions

Programmed by

Manager or
Engineer.

Engineer

Default: 1111

Access to all engineering functions; also

Set/Unset system for test purposes.

Programmed by
Engineer.

Duress

Unsetting system generates silent ‘Duress’ or
‘Hold Up’ signal.
NOTE: May be permitted at Grade 3 only with
police approval

Programmed by

Engineer.

Guard

Unset system, but only after an alarm has been

active for a minimum time (programmable). Also
Set system. An output type is available to signal

whenever this code is used.

Programmed by
Engineer.

«
...
30
31
32
33
34
...
»

Содержание Pyronix EURO 280









































































Отзывы:

Нет отзывов