Page | 33
User Type
Functions
Operation
Dial Out
Default: 5555
(Duress Code 20)
Forces the panel to dial out to UDL software when
entered in “Day Mode”
Programmed by
Engineer.
4.1.32 User Set Options
The User Codes can be programmed as the following:
Unset/Set:
The code will set and unset the EURO 280 system
(Default)
Unset Only:
The code will only unset the EURO 280 system once it is set.
Set Only:
The code will only set the EURO 280 system.
None:
The code will not be used to set and unset the system. It can be used with tags for
Access Control purposes but will not be permitted to set/unset the system.
4.1.33 Flexi Set
If enabled, the user will be able to select which Areas they can set. The Areas of choice will
depend on the restrictions of both the code and the keypad it is entered on.
If disabled, the user code will automatically set the selected area(s).
NOTE:
This option has to be set to “No” if the user is a proximity tag to be used on
tag readers
.
Change Codes
Using the
and
keys, scroll to
‘CHANGE CODES?
’
Press the
key
5 Digit Pins
Enter
: for
No
Enter
: for
Yes
(
Default
for Grade 3)
Press the
key
Change Duress Codes
Press the
key to Change the Duress
Codes, or for the next function press the
key.
NOTE: User codes can only be
changed in the user manager mode
Duress Codes
Enter the required Duress User Number
using the numeric keys.
Press the
key
If a code or tag is already allocated, the
display will show [******]. Enter the
new code, or present a tag to keypad. To
erase the existing code press the
key. Press
key
User Type
Enter
: for
Duress
(Default)
Enter
: for
Guard
Enter
: for
Dial Out
Press the
key