Page | 24
Assign Keypads/Readers
Using the
and
keys, scroll to
‘ASSIGN KEYPADS/READERS?
’
Press the
key
Address
Enter the address of the
keypad/reader you wish to assign.
Press the
key
Type
Enter
: for
Keypad
Enter
: for
Reader
Enter
: for
Not Used
Press the
key
Reader Is
NOTE: This is only displayed if
you have programmed a Reader.
Enter
: for
Set Point
Enter
: for
Ward Control
Enter
: for
Access Control
Enter
: for
Unset Only
Enter
: for
Entry Control
Press
Set Point Sets
Select the Areas you would like the
device to set.
Please note the primary
Areas are A,B,C & D.
Press the
key
Repeat for
Set Point Unsets
Press the
key
Repeat for
Set Point In
Press the
key
Set Point Description and
Location?
If you would like to enter a
description for the device, press the
key. After entering a description
press
to enter a location Text
programming is described on page: 7.
Press the
key when finished.
Repeat for all other keypads/readers
or press the
key to exit. You will
be returned to the Engineer Menu.