Page | 16
If the
GREEN LED
on the wireless bell
momentarily flashes and the display shows
‘Bell Learnt’ the device has been learnt
successfully.
Press the
key.
If the
RED LED
flashes, the device has not
correctly learnt. Repeat the procedure to
re-learn.
Program Keyfob Buttons
To program keyfob buttons, press the
key, or press
to exit.
NOTE: Any keyfob must be learnt in
the Master Manager Menu before this
function is enabled. See the User
Manual for more information.
Use the
and
keys to select the
user that the buttons need to be
programmed for. Press the
key.
Use the
and
keys to select the
button or select the button below. Press
the
key.
: for
.
: for
:
I
:
II
:
+
:
I+II
:
+ I.
:
+II
Use the
and
keys to select the
button action. Press the
key.
: No Action
: Show Status
: Set Area
: Unset Area
: Operate Output
: No Action
NOTE: Wireless Arming Stations are also learnt on to the panel in the ‘Wireless Device
Control’ menu. Please refer to the Wireless Arming Station’s manual for full instructions.