manualshive.com logo in svg

HGG PCL 600, Руководство оператора, Страница: 64 / 69

Поделиться
Скачать
HGG PCL 600 Скачать руководство пользователя страница 64

 
 

PCL 600 

Operators Manual 

v 2.0 

64

 

Error number 

Error text 

Problem/Reference chapter 

Material handling 

014:016:050 

Error. Gripper has lost material. 

Re-grip the material. Check that the 
material detection mechanism is not 
fully retracted. 

014:016:055 

Error. No material in gripper. 

014:016:058 

Function only allowed in program mode. 

You are not allowed to ‘home’ at this 
stage of the process. 

014:016:063 

Material between light crossing at infeed cabin. 

The infeed sensor is blocked. 
Remove material from blocking the 
infeed sensor or clean the infeed 
sensor if it is dirty. 

014:016:067 

Error, material between material sensor at cabin. 

014:016:068 

Error, material gripped, home not allowed. 

You are not allowed to ‘home’ when 
there is material in the gripper. 

014:016:069 

Error, gripper not fully open, grip not allowed. 

Make sure the gripper is not stuck 
and can move freely, try again. 

014:016:071 

Error, open gripper timeout. 

It has taken too long to open the 
gripper. Make sure the gripper is not 
stuck and can move freely, try again 

014:016:076 

Printer not in safe position <state> 

Check the printer switch. Check if 
there was a dip in air pressure. 

014:016:096 

Error gripping material. Material between infeed 
light crossing. 

The infeed sensor is blocked. 
Remove material from blocking the 
infeed sensor or clean the infeed 
sensor if it is dirty. 

014:016:104 

Gripper angle timeout. 

It has taken too long to tilt the 
gripper to the given angle. Check if 
the gripper can tilt freely, try again. 

014:016:105 

Error pushing material to cabin. Material too short. 

The profile is too short to contain all 
the parts. Load a longer bar or a 
cutting file that does fit into this bar. 

014:016:203 

Gripper found no material. 

Make sure there is material present 
and correctly positioned. Check the 
gripper material detection 
mechanism. Try again. 

014:016:204 

Material Detect Cylinder not in back position. 

Check the gripper material detection 
mechanism. Check that the cylinder 
is not blocked. 

014:016:205 

Track. Move to safe position timeout. 

Turn off ‘Slow’ material handling if it 
is activated. Check if the gripper 
home switch is still working. Try 
again. 

014:016:206 

Error moving to safe position, safe position not 
reached. 

Check if the gripper home switch is 
still working. Try again. 

014:016:213 

Material detect switch did not reach back position 

Check the gripper material detection 
mechanism. 

 
 
 
 

Содержание PCL 600






































































Отзывы:

Нет отзывов