PCL 600
Operators Manual
v 2.0
11
2.2
Personal safety instructions
An operator has to keep the following safety instructions in mind:
Do not use the machine without following the instructions in the manuals.
Read and understand the Operators manual and all safety labels before operating or maintaining this
machine.
Read and understand the Instruction manual of the plasma unit before plasma cutting is used.
Read and understand the dust collector installation and operation, before using a dust collector.
Keep these manuals at hand at all times and read them as many times as necessary for a complete
understanding.
Only instructed operators are permitted to operate this machine. Instruction should include instructions
in operation under normal conditions and emergency situations.
Before starting this machine, check that:
All persons are clear of the machine.
No maintenance work is being performed on the machine.
All fixed guards are in place. Some can be removed for cleaning, lubrication and maintenance.
The machine is free of jams and other obstacles.
Furthermore:
Never leave the machine stopped in such a manner that another worker can start the machine while
you are working on or within the machine.
Never reach into the machine for any reason unless the machine is at a complete stop.
Never change or override the function of electrical interlocks or other machine shutdown switches.
Never modify the machinery in any way.
Never exceed the maximum load.
Never look directly at the torch during cutting, the bright light could damage your eyesight. Always use
safety glasses. The cutting cell doors cannot be opened during the cutting process. The windows of
the cutting cell have a UV protection shield to protect your eyes.
Always wear a helmet if material is being loaded using an overhead crane.
2.3
Personal protection equipment
For safety reasons operators have to wear:
Safety
shoes.
Flame proof overalls or flame proof clothing.
Flame proof gloves.
Ear
protection.
Safety
glasses.
Helmet (when using an overhead crane).