Hettich HettCube 200, Руководство по эксплуатации

Страница: 96 / 174

en 12.2020 / Rev. 02 AB66005 96 / 174
Operation
Fig. 147: ‘Date & time’ menu
Fig. 148: Setting the time
1
‘Hour’ input
2 ‘Minute’ input
3 [Cancel] button
4 [Clear input] button
5 [Confirmation] button
6 Keypad
2.
Fig. 149: ‘Temperature’ menu
1
[°C] button
2
[°F] button
1. Tap on the displayed time.

The dialogue opens for editing the time.
You can now either
■
select the existing values by tapping them and entering new
values via the keypad or
■
delete the existing values with the
[Delete entry] button and
entering new values via the keypad.
Confirm the entry with the
[Confirmation] button.
You can undo the change with the
[Cancel] button and go back
to the previous display.
6.13.3 Temperature
In this menu, you can change the unit of tempera-
ture. The incubator can be switched between °C and
°F on the temperature display. If these units are
changed, the settings must be reset for
−
tolerance band

Chapter 6.13.4 ‘Tolerance
band’ on page 97 and
−
temperature guard classes 3.1 and 3.2.

‘Class
3.1’ on page 99 and

‘Class 3.2’
on page 99 .
It is not possible to change the temperature unit
when manual or program mode is active.
To set the temperature unit, tap on the
[°C] or [°F] button.