31 / 174
en
12.2020 / Rev. 02
AB66005
Commissioning
1
Fig. 24: Levelling the incubator
1 Adjustable device foot
Power supply connection
1.
Set up and level the incubator stably on a flat, non-flammable
surface.
For HettCube 400/400 R and HettCube 600/600 R incubators
only:
■
Screw the levelling elements (A) that are screwed into the
device feet far enough downward that they touch the floor
and the rollers are completely relieved.
■
Align the incubator horizontally by turning the levelling ele-
ments.
■
Screw the adjusting foot on the door downward until it is
approx. 7 mm above the floor to keep the incubator from
tipping. Screw the hexagon nuts upward and tighten to
secure the adjusting foot.
For HettCube 200/200 R incubator only:
■
Align the incubator horizontally by turning the levelling ele-
ments screwed into the device feet.
■
For incubator with glass door only: Screw the adjusting foot
on the door downward until it is approx. 7 mm above the
floor to keep the incubator from tipping. Screw the hexagon
nuts upward and tighten to secure the adjusting foot.
■
Only for devices of size 400 and 600: Transport securing
device
CAUTION
Two incubators may only be stacked on top of
each other in the case of HettCube 200/200 R.
The upper incubator must be fixed to the lower
incubator with the stack kit (order no. 60009)
and additionally secured against tilting. We rec-
ommend the fixing kit (order no. 60012) to
securely fasten the upper incubator to the wall.
2.
If required, adjust the heights of the slide-in modules and
drawers; see
Chapter 5.3.1 ‘Standard slide-in modules’
on page 38 and
Chapter 5.3.2 ‘Telescopic slide-in modu-
5.2.2
Incubator connection
DANGER
A hazard is posed by a damaged mains supply line.
There is an electric shock hazard for personnel.
−
Check the incubator and the mains supply line for
damage. If damage is discovered, the incubator
must not be operated.
−
The incubator may only be operated at a socket
with a personal protection switch.
Содержание HettCube 200
