Hettich HettCube 200, Руководство по эксплуатации

Страница: 51 / 174

51 / 174 en 12.2020 / Rev. 02 AB66005
Operation
Fig. 56: Main screen
Item Designation Description/function
1
Operating modes

Chapter 6.11
‘Manual mode’ on page 54,

Chapter 6.12 ‘Program mode’
on page 69
Call of manual and program mode.
2
‘Date’ and ‘Time’ display
Shows the current date and time. These can be changed in
the settings (3).
3
Device settings

Chapter 6.13
‘Device settings’ on page 93
Calls up the device settings.
4 HettCube activities Shows the current incubator activities.
Program mode is active in the figure (
Fig. 56 ‘Main screen’
on page 51).
5
Process flow information

Chapter 6.10 ‘Process flow infor-
mation’ on page 52
Zoomable temperature process flow in three levels. Events,
such as breaks, continuations, open door, power failure,
etc. are marked on the temperature process flow curve
with various symbols.

Chapter 6.10 ‘Process flow information’ on page 52
Further information about the symbols:

Appendix A ‘Soft-
ware symbols’ on page 155
6 Display of ‘Actual temperature’ in
the interior
Shows the current temperature inside the incubator.
The detailed screen switches to the main screen
automatically.