Hettich HettCube 200, Руководство по эксплуатации

Страница: 15 / 174

15 / 174 en 12.2020 / Rev. 02 AB66005
Safety information
■
The drying rate of the culture medium during incubation is influ-
enced by various factors, such as
–
ambient conditions (e.g., relative humidity of the environment)
–
handling and working method (e.g., previous processes, dura-
tion, and frequency of doors opening)
–
culture or incubation conditions (e.g., incubation time and
temperature).
These influences should be especially considered in the case of
longer incubation times.
■
The sample material should not be placed outside of the defined
utilized space

Chapter 9.7 ‘Definition of the utilized space’
on page 143. The specified temperature data refer to the defined
utilized space.
■
Repairs may only be performed by a person authorized by the
manufacturer.
■
Only original spare parts and approved original accessories of the
company Andreas Hettich GmbH & Co. KG may be used.
■
The safety and reliability of the incubator are only guaranteed if:
–
the incubator is operated according to the operating instruc-
tions.
–
the electrical installation at the set-up site of the incubator
meets the requirements of the EN/IEC regulations.
The incubator is safe if used as intended and
observing the descriptions and information given in
this documentation.