MAN3186 - TITANUS MICRO
•
SENS®
130
B
B
A
A
A
B
B
► Attach the spacers (included with the installation kit) on the assembly
holes (pos. A) of the mounting plate.
Image 83:
Fixing points for network module on the mounting plate of additional
housing
► Fasten the mounting bases for cable ties to the bottom part of the
housing by means of a fastening screw on the mounting plate (pos. B).
Two mounting bases and cable ties are supplied with the additional
housing.
► Open the required, pre-stamped cable glands (max. 8x M20 and 6x
M25) in the additional housing. Use a screwdriver if required.
► Attach cable entries (M20 or M25) to the open cable glands. Then press
the cable entries into the corresponding opening.
► Connect a battery and memory card to the network module (included in
the scope of delivery for type NU
‑
2
‑
D, NU
‑
2
‑
DO, NU
‑
2
‑
D
‑
F and
NU
‑
2
‑
DO
‑
F). Pay attention to the correct polarity during the installation!
► Mount the network module with the three attached spacers on the
installation plate.
