Hal Communications DKB-2010, Инструкция по эксплуатации, Страница: 4 / 101

2
ILLUSTRATIONS
Figure 2.1: Typical Connection for Cathode Keying ........................................ 9
Figure 2.2: Typical Connection for Grid-Block Keying ..................................... 10
Figure 2.3: Typical Loop Circuit Connection .................................................. 10
Figure 2.4: Connection for Loop Circuit with Negative Lead Grounded ............ 11
Figure 2.4a: Plug Preparation ....................................................................... 11
Figure 2.5: Bridge Polarity Protection Circuit ................................................. 12
Figure 3.1: Location of Controls and Keys ..................................................... 14
Figure 4.1: MM5740 Keyboard Encoder Integrated Circuit .............................. 18
Figure 4.2: Shift Register Waveforms for Transmission of the Letter "F" .......... 24
Figure 4.3: Shift Register Control Signals for Morse Operation ........................ 25
Figure 4.4: Generation of the Letters-Shift Code ........................................... 26
Figure 4.5: Generation of the Figures-Shift Code ........................................... 26
Figure 4.6: Morse Clock and Decoder Waveforms .......................................... 29
Figure 4.7: Production of Dots by the Morse Character Generator .................. 29
Figure 4.8: Production of Dashes by the Morse Character Generator ............... 30
Figure 4.9: Suppression of Dot at End of Character to Produce Intercharacter
Space ....................................................................................... 31
Figure 4.10: Development of Clock Pulses for Automatic Character Sequencers 33
Figure 5.1a: Rear Panel Component Placement
Figure 5.1b: Matching Transformer and Terminal Strip Details
Figure 5.1c: Rear Panel Wiring
Figure 5.1d: Wiring Detail for T301
Figure 5.2: Installation of Power Cord Strain Relief
Figure 5.3a: Top Panel Component Placement
Figure 5.3b: Top Panel Wiring
Figure 5.4: Wiring Harness Placement
Figure 5.5: Assembly of Cabinet End Panels
Figure 5.6: Space Bar mounting detail
Figure 5.7: Integrated Circuit Orientation
Figure 5.8: Mounting the MJE521 Power Transistor
Figure 5.9: Capacitor Placement on Power Supply Board
Figure 5.10: Jumper Placement on Logic Circuit Board
Figure 5.11: Weight-Ratio Jumper Placement
Figure 5.12: Bottom Cover Assembly
Figure 5.13: Assembled DKB-2010 with Bottom Cover Removed
Figure 5.14: Diode Placement in Identifier Matrix ........................................... 44
Figure 6.1: Logic Circuit Board Test Points .................................................... 50
Figure 6.2: Keyswitch Circuit Board Test Points ............................................. 51
Figure 6.3: Power Supply Circuit Board Test Points ....................................... 52