Haier AU082FYCRA(HW), Руководство по обслуживанию

Страница: 9 / 112

7
Model AU112FYCRA(HW)
Power supply V-Ph-Hz 1PH, 220-240V~,50/60Hz
Cooling*(1) Capacity kW 11.50
Input kW 3.83
Cooling*(2) Capacity kW 13.50
Input kW 2.94
Heating*(3) Capacity kW 10.5
Input kW 3.37
Heating*(4) Capacity kW 11.00
Input kW 2.61
EER*(1) kW/kW 3.00
EER*(2) kW/kW 4.60
Max.input consumption kW 5.60
Max.input current A 24.3
Compressor
Model TVB306FKMMC
Type ROTARY
Brand Mitsubishi Electric
Capacity kW 10.27
Input kW 3.42
Rated load current A 9.87
Locked rotor Amp A 45.5
Thermal protector Inner
Refrigerant oil type FW68S
Refrigerant oil charge ml 870
Outdoor fan motor
Model SIC-88FWJ-F1180-1
Type DC Motor
Brand NIDEC SHIBAURA
Input kW 180
Speed r/min 160-780
Water pump
Type UPMXL GEO 25-125 130 PWM-Grundfos
Input (H/M/L) W 160/110/80
Pumping head m 12.5
Outdoor air flow m³/h 7200
Throttle EXV
Outdoor noise level (sound power)*(3) dB(A) 62.7
Flow rate of water m³/h 1.89
The water pressure drop of heat-exchanger kPa 40
The Max. and Min. water inlet pressure kPa 500/150
Outdoor unit
Net dimension (W×H×D) mm 950×1490×380
Packing dimension(W×H×D) mm 1010×1520×458
Net/ Gross weight kg 139/142
Refrigerant
Type R32
Charged volume kg 2.40
Connection wiring Power wire mm2 3×10.0
Pipe diameter Water inlet/outlet inch 1-1/4''
Controller (optional) Wired controller
Ambient temperature range
Cooling:10~46; Heating: -20~35(Antifreeze must be added
below 5)
Leaving water temperature range Cooling: 5~20; Heating: 20~55
Note: Specifications are based on the following conditions:
1. Cooling: (*1) Entering/leaving water temperature: 12/7°C,outdoor ambient temperature 35°C DB.
(*2) Entering/leaving water temperature: 23/18°C,outdoor ambient temperature 35°C DB.
2.Heating: (*3) Entering/leaving water temperature: 40/45°C,outdoor ambient temperature 7°C DB/6°C WB .
(*4) Entering/leaving water temperature: 30/35°C,outdoor ambient temperature 7°C DB/6°C WB .
3. It is tested in a semi-anechoic room (sound power).
4. The above data may be changed without notice for future improvement on quality and performance.