Haier AU082FYCRA(HW), Руководство по обслуживанию

Страница: 8 / 112

6
5. Specifications
Model AU082FYCRA(HW)
Power supply V-Ph-Hz 1PH, 220-240V~,50/60Hz
Cooling*(1) Capacity kW 5.50
Input kW 2.34
Cooling*(2) Capacity kW 7.00
Input kW 2.06
Heating*(3) Capacity kW 7.50
Input kW 2.34
Heating*(4) Capacity kW 7.80
Input kW 1.77
EER*(1) kW/kW 2.35
EER*(2) kW/kW 3.40
Max.input consumption kW 4.90
Max.input current A 21.3
Compressor
Model SVB200FKMMC
Type ROTARY
Brand Mitsubishi Electric
Capacity kW 6.45
Input kW 2.15
Rated load current A 7.90
Locked rotor Amp A 24
Thermal protector Inner
Refrigerant oil type FW68S
Refrigerant oil charge ml 400
Outdoor fan motor
Model SIC-88FWJ-F1180-1
Type DC Motor
Brand NIDEC SHIBAURA
Input kW 180
Speed r/min 160-850
Water pump
Type Para 25/8-75/SC-WILO
Input (H/M/L) W 75/57/35
Pumping head m 8
Outdoor air flow m³/h 4200
Throttle EXV
Outdoor noise level (sound power)*(3) dB(A) 60.9
Flow rate of water m³/h 1.38
The water pressure drop of heat-exchanger kPa 45
The Max. and Min. water inlet pressure kPa 500/150
Outdoor unit
Net dimension (W×H×D) mm 950×965×395
Packing dimension(W×H×D) mm 1010×990×458
Net/ Gross weight kg 87/90
Refrigerant
Type R32
Charged volume kg 1.15
Connection wiring Power wire mm2 3×10.0
Pipe diameter Water inlet/outlet inch 1-1/4''
Controller (optional) Wired controller
Ambient temperature range
Cooling:10~46; Heating: -20~35
(Antifreeze must be added below 5)
Leaving water temperature range Cooling: 5~20; Heating: 20~55
Note: Specifications are based on the following conditions:
1. Cooling: (*1) Entering/leaving water temperature: 12/7°C,outdoor ambient temperature 35°C DB.
(*2) Entering/leaving water temperature: 23/18°C,outdoor ambient temperature 35°C DB.
2.Heating: (*3) Entering/leaving water temperature: 40/45°C,outdoor ambient temperature 7°C DB/6°C WB .
(*4) Entering/leaving water temperature: 30/35°C,outdoor ambient temperature 7°C DB/6°C WB .
3. It is tested in a semi-anechoic room (sound power).
4. The above data may be changed without notice for future improvement on quality and performance.