Hague Watermax 10 Series, Руководство пользователя

Страница: 3 / 40

10 Series Owner’s Manual
1
PREFACE
Congratulations on your decision to place your confidence in a superior
Hague WaterMax water treatment appliance.
Recognized nationwide for built-in quality, dependability, and ease of service,
this appliance represents state-of-the-art in home water treatment.
While your appliance should be installed and serviced by a professional
Hague WaterMax dealer, important information is contained in this manual
which will help you get the maximum benefit and enjoyment from your
particular appliance.
We urge you to read this information carefully and review it again at any time
a malfunction may occur. In most cases, this review will uncover minor
problems that you can correct yourself, thereby saving you time and the cost
of an unnecessary service call.
How To Get
Maximum Efficiency
1. Maintain salt level at least 1/3 full; use solar or pellet salt. Purchase a
clean grade of salt. Use one or the other; do not mix.
2. Allow the appliance to regenerate at a time when the water is not being
used. If you have more than one appliance, allow two hours between each
regeneration.
3. Protect your WaterMax, including the drain line, from freezing.
4. Should dirt, sand, or large particles be present in your water supply, it is
important that you consult your Hague dealer for filters that will eliminate
this problem.
5. Bypass the appliance(s) if well, plumbing, or pump work is required, and
turn on outside tap until water runs clear before putting the appliance back
in service.
Your WaterMax appliance may be disinfected with 5.25% sodium
hypochlorite, which is the active ingredient in household bleach. To disinfect
your appliance, add 4 fluid ounces of household bleach per cu.ft. of resin to
the brine well of the brine tank (the brine tank should have water in it to
permit the solution to be carried into the softener.) For non-resin media, add
.8 fluid ounces of household bleach per cu.ft. of media to the brine well.
Initiate an immediate recharge (Page 9.)
OPERATIONAL, MAINTENANCE, AND REPLACEMENT REQUIREMENTS ARE ESSENTIAL FOR THE
PRODUCT TO PERFORM TO SPECIFICATIONS.