Hague Watermax 10 Series, Руководство пользователя

Страница: 17 / 40

10 Series Owner’s Manual
15
TROUBLE-SHOOTING
PROBLEM CAUSE ACTION
No soft water after
No salt in brine tank. Add salt.
regeneration.
Sediment in brine tank has Remove the brine line and flush
plugged the brine line and/or clean. Clean air check. Clean
air check. (See Fig. 12, pg. 31.) brine tank.
Refill flow control is plugged. Remove brine piston housing and
(See Fig. 9, pg. 27.) clear debris from the flow control.
Drain line is pinched, frozen or Straighten, thaw or unclog the drain
restricted. (See Fig. 1, pg. 3.) line.
Clogged injector assembly. Remove injector cap and clean
(See Fig. 6, pg. 21) nozzle and throat with a wooden
toothpick. Replace throat if
removed.
Salt bridge has formed. High humidity or the wrong kind of
(See Fig. 4, pg. 19) salt can create a salt bridge. This is
a crust that forms an empty space
between the water and salt. To
test, use a blunt object like a broom
handle. Push the handle into the
salt to dislodge the salt bridge.
No soft water.
The plumbing bypass valve is in Place bypass valve in the service
the bypass position. (See Fig. 7, pg. 23.) position.
Appliance is plumbed in Check that appliance is plumbed
backwards. (See Fig. 1, pg. 3.) properly.
Extended
power outage Reset time. (See Customer Settings)
Water hardness has increased Retest water and reset hardness. (See
Installation Record)
Not metering water.
Check light. Light should flash with water
usage. If no light, see below.
Blending dial is open.
Make sure blending dial is closed.
Light does not blink The bypass valve is in the Place bypass in the service position.
when water is flowing. Bypass position. (See Fig. 7, pg. 23.)