Hague Watermax 10 Series, Руководство пользователя

Страница: 11 / 40

10 Series Owner’s Manual
9
3.06a Push the SELECT and CHANGE buttons until the desired chlorine number is reached. In this example,
set to: Chlor. ppm 000
3.07 Push the NEXT button to step to the next Parameter. The display will show: Sulfur ppm
This parameter is used to record the tested sulfur content of the water.
3.07a Push the SELECT and CHANGE buttons until the desired sulfur number is reached. In this example, set
to: Sulfur 00.0
3.08 Push the NEXT button to step to the next parameter. The display will show: pH ###
This parameter is used to record the tested pH of the water.
3.08a Push the SELECT and CHANGE buttons until the desired pH number is reached. In this example, set to:
pH 07.0
3.09 Push the NEXT button to step to the next parameter. The display will show: Iron Bact NO or YES
This parameter is used to record the presence of iron bacteria in the water.
3.09a Push the SELECT and CHANGE buttons until the desired word is reached. In this example, set to: Iron
Bact. NO
3.10 Push the NEXT button to step to the next parameter. The display will show: Tot. Regens. ###
This parameter is used to record the total number of regenerations the appliance has gone through and
cannot be reset.
3.11 Push the NEXT button to step to the next parameter. The display will show: Tot. Gal. ########
This parameter is used to record the total number of gallons of water that has passed through the appliance
and cannot be reset.
3.12 Push the NEXT button to step to the next parameter. The display will show: Model # #####
This parameter is used to record the model number of the appliance.
3.12a Push the SELECT and CHANGE buttons until the desired model number is reached. In this example, set
to: Model # 12AMQ
3.13 Push the NEXT button to the next parameter. The display will show: Save History NO
This parameter, if set to YES, will save the current information you have just entered. If set to NO, it will
leave the History file as previously defined.
3.14 Push the CHANGE DIGIT button to toggle between Yes or No. In this example, set to: Save History
YES
4.00 Push the NEXT button to step to the next parameter. The display will show: Tot. Regens. ###
This parameter displays the number of regenerations the appliance has gone through since the last time the
SERVICE SETTINGS mode was entered. This parameter is reset to 000 after exiting the SERVICE
SETTINGS mode.
Push the NEXT button to step to the next parameter. The display will show:
Tot. Gal. ###
This parameter displays the Total Gallons the appliance has gone through since the last time the SERVICE
SETTINGS mode was entered. This parameter is reset to 000 after exiting the SERVICE SETTINGS
mode.
5.00 Push the NEXT button to step to the next parameter. The display will show: Mode # The “Mode #” is
the number of the OPERATING MODE for which the systems control is set.
5.00a Push the CHANGE DIGIT button to change the value of “Mode #” until it reads 2 (for this example.)
6.00 Push the NEXT button to step to the next parameter. The display will show:
Hard. Gr. ### The “###”
is the hardness number of the water tested. This number is to be the actual hardness reading and is not
compensated for iron.
6.00a Push and release the SELECT DIGIT button until the cursor ( _ ) is positioned in the display as follows:
Hard. Gr. ###. The cursor is now under the “one” position.
6.00b Continue pushing the SELECT and CHANGE buttons until the desired hardness number is displayed.
Example: Hard. Gr. 040
7.00 Push the NEXT button to step to the next parameter. The display will show:
Iron ppm ###