Hague Watermax 10 Series, Руководство пользователя

Страница: 8 / 40

10 Series Owner’s Manual
Press and hold (approximately 3 seconds) until display changes to “Set
language???”. Use the NEXT button to step through parameters that can be
set.
(B) IMMEDIATE RECHARGE
FUNCTION:
Used to put the appliance into an immediate regeneration.
Press and hold (approximately 5 seconds) until display changes to “Going
to 1”. The appliance is now in regeneration and will return to “Gal.
Remain” after completion of all cycles.
(C) CUSTOMER SETTINGS/NEXT
This section is recommended for qualified service personnel only. Must be
set correctly for proper performance.
FUNCTION: Multi-purpose. 1.) Used to enter CUSTOMER SETTINGS
mode. 2.) Used to “step” through parameters that can be set in
CUSTOMER & SERVICE SETTINGS modes. Press and release to
accomplish various functions.
(D) CHANGE DIGIT
FUNCTION:
Used to change values of parameters that can be set. Used
in conjunction with SELECT DIGIT button. Used simultaneously with
CHANGE DIGIT button to “speed up” individual regeneration cycle times
for a quick test.
Press and release the Select Digit button to move cursor one digit to the left
of parameter that can be set. When cursor is at extreme left position, press
again to reset cursor to extreme right position.
(E) SELECT DIGIT
FUNCTION:
Used to control cursor movement when in CUSTOMER &
SERVICE SETTINGS modes. Used in conjunction with CHANGE DIGIT
button. Also used simultaneously with CHANGE DIGIT button to “speed
up” individual regeneration cycle times for a quick test.
Press and release the Select Digit button to move cursor one digit to the left
of parameter that can be set. When cursor is at extreme left position, press
again to reset cursor to extreme right position.