Hague Watermax 10 Series, Руководство пользователя

Страница: 10 / 40

10 Series Owner’s Manual
Push the SERVICE SETTINGS button to enter SERVICE SETTINGS mode. The display will show: Set
language???
This parameter is used to set the language that is displayed in the CUSTOMER SETTINGS mode: ENG –
English, FRA – French, ESP – Spanish, DEU – German, ITA – Italian.
1.00 Push the CHANGE DIGIT button until the correct language is displayed. In this example, set to: Set
Language ENG.
2.00 Push the NEXT button to step to the next parameter. The display will show: Units ENG
2.00a Push the CHANGE DIGIT button to toggle English/metric units of measure.
For this example, set to: Units ENG.
3.00 Push the NEXT button to step to the next parameter. The display will show: History NO This
parameter is used to enter the History file. The History file is used as a record of water readings for future
reference. (3.00 – 3.14 is an electronic notepad only and does not affect the operation of the appliance.)
3.00a Push the CHANGE DIGIT button to toggle between Yes or No. Setting to “Yes” will enter the History
file and setting to “No” will bypass the History file. In this example, set to: History Yes
3.01 Push the NEXT button and the display will show Soft Ver 1.00. This is information only and cannot be
reset. Push the NEXT button to step to the next parameter. The display will show: Inst. Date ######
This parameter is to be set to the installation date of the appliance. There are six digits. The first two are
the month. The next two are the day and the final two are the year. This is the first entry in the History
file.
3.01a Push and release the SELECT DIGIT button until the cursor ( _ ) is positioned in the display as follows:
Inst. Date ######
3.01b Push and release the CHANGE DIGIT button until the value above the cursor is equal to the tens position
of the desired Month setting.
3.01c Continue using the SELECT and CHANGE buttons until the desired date is displayed. Example: April
22, 2000 = 042200
3.01 d Push the SELECT and CHANGE buttons until the desired date is entered.
3.02 Push the NEXT button to step to the next parameter. The display will show:
# People ## This
parameter is used to record the number of people in the household and should match the “# People” setting
in the CUSTOMER SETTINGS file.
3.02a Push the SELECT and CHANGE buttons until the desired number of people in the household is reached.
In this example, set to: # People 04
3.03 Push the NEXT button to step to the next parameter. The display will show: Hard. Gr. ###
This parameter is used to record the tested Hardness of the water.
3.03a Push the SELECT and CHANGE buttons until the desired hardness number is reached. In this example,
use 40 gpg: Hard. Gr. 040
3.04 Push the NEXT button to step to the next
Parameter. The display will show: Iron ppm ###
This parameter is used to record the tested iron content of the water.
3.04a Push the the SELECT and CHANGE buttons until the desired iron number is reached. In this example, set
iron to 002 (this is 2 ppm).
3.05 Push the NEXT button to step to the next Parameter. The display will show: Mang. ppm ###
This parameter is used to record the tested Manganese content of the water.
3.05a Push the SELECT and CHANGE buttons until the desired manganese number is reached. In this example,
set to: Mang. ppm 000
3.06 Push the NEXT button to step to the next Parameter. The display will show: Chlor. ppm ###
This parameter is used to record the tested chlorine content of the water.