Hague Watermax 10 Series, Руководство пользователя

Страница: 13 / 40

10 Series Owner’s Manual
11
monitor water usage properly.
17.00a Push the SELECT and CHANGE buttons until the correct value is displayed.
In this example, set to: Turbine # 135
18.00 Push the NEXT button to step to the next parameter. The display will show: Reg. Tonight NO
This parameter, if set to YES, will force a regeneration at the next set regeneration time (i.e. 02.00.) After
the regeneration, the parameter will automatically reset to “No.”
18.00a Push the CHANGE DIGIT button to toggle between Yes or No.
In this example, set to: Reg. Tonight YES
19.00 Push the NEXT button to step to the next parameter. The display will show: SAVING – then display
Gal. Remain #####
This is the normal operation display for OPERATING MODE 2. The # # # # # represents the number of
gallons of softening capacity between regenerations. This completes the SERVICE SETTINGS mode.
Even though the SERVICE SETTING mode has been completed, the WaterMax is not ready for service
until the CUSTOMER SETTINGS mode is completed. The following example takes you through the
steps required for setting the parameters of the CUSTOMER SETTINGS mode for OPERATING MODE
2.
1.00 Push and hold the Customer Settings/Next button to enter CUSTOMER SETTINGS mode. The display
will show: Set Time ##:## This parameter is to be set to the current time of day using military time.
1.00a Push the SELECT and CHANGE buttons until the desired time is displayed. In this example, set time to:
13:00. (13:00 is 1:00 p.m., 14:00 is 2:00 p.m.)
2.00 Push the NEXT button to step to the next parameter. The display will show: Reg Time ##:##
This parameter is to be set for the desired time a normally scheduled regeneration is to occur using
military time.
2.00a Push the SELECT and CHANGE buttons until the desired time is displayed. In this example, set to: Reg
Time 02:00. (02:00 is 2:00am, 14:00 is 2:00pm)
3.00 Push the NEXT button to step to the next parameter. The display will show: # People ##
3.00a Push the CHANGE button until the correct number of people in the household is displayed.
4.00 Push the NEXT button to save the parameter settings and exit the CUSTOMER SETTINGS mode.
The display will show: SAVING – then display Gal Remain #####
If you followed the above directions correctly, your WaterMax Systems Control is ready for
OPERATING MODE 2 service.