hager HZI855 Скачать руководство пользователя страница 6

Страница: 6 / 65

6LE007317A

5. Environmental

HZI855 meets the following environmental requirements:

5.1. IP Rating

• IP65 door mounted with gasket in accessory.
• IP30 door mounted without gasket.
• IP2X on the back of the controller.

5.2. Operating Conditions

5.2.1. Temperature

• From -30 to + 70°C
NOTE: With limitations on the LCD screen that may show temporary distortion below -10°C.

5.2.2. Hygrometry

• 95% humidity without condensation at 55°C.

5.2.3. Altitude

• Up to 2000m

5.3. Storage Conditions

5.3.1. Temperature

• From -40 to + 70°C

5.3.2. Hygrometry

• Recommendation: to be stored in dry, non-corrosive and non-saline atmospheric conditions.

5.3.3. Storage duration period

• Maximum storage up to a period of 12 months

5.3.4. Storage position

• a maximum of 5 boxes may be stacked vertically

5.3.5. Volume and shipping weights

• Volume LxWxH (mm) inc. packaging: 295x255x115
• Weight: net 1.060 kg/ gross 1.500 kg

6. Standard compliance and marking

Lead free

process

Cmim

CE marking

WEEE

• HZI855 is built in accordance with 2012/19/EU directive:

Standards compliance

Certified according to:
IEC 61010-2-201

IEC 61010-1

GB/T 14048.11 Annex C
Conform to the requirements of:
IEC 60947-6-1 when used with an IEC 60947-6-1 certified RTSE (Remotely operated transfer switch).

Содержание HZI855


































































Результаты поиска

Содержание HZI855

Отзывы:

hager HZI855, Инструкция по эксплуатации, Страница: 6 / 65

Результаты поиска

Содержание HZI855

Отзывы: