6LE007317A
18
9. Visualisation options
The visualisation DASHBOARDS
The controller has a direct access button to the visualization dashboards on the front face. The dashboards can be accessed by short
pressing the
key. By pressing again we switch from one dashboard to another and inside each dashboard there might be different
number of screens as it is shown on the image below. Each dashboard is numbered from 1 to 7 (Ex. 4. TIMERS) and the screens are
numbered using a second digit (Ex. 4.1 RUN / RUNNING).
The dashboards can be visualized and screened through without the use of a password.
By pressing the
key it gives direct access to these screens (no matter the current menu screen).
This is available only for the screens of the dashboard menu.
All the dashboards have the same display format as follows:
MIMIC:
This screen gives the user information on the availability of the sources, the position of the switch. The user can cycle 3 sub-
menus using the navigation arrows:
MET.: gives the user information on the voltage, current and frequency of the sources.
STAT.: gives the user information on the sources and loads.
INFO.: gives information on the time running of each source.
* The maintenance dashboard allows users to visualise all maintenance alarms configured.
Dashboard name
Product name
Date/Time
Active alarms
Screen navigation
Information
2
STATUS
<2.1> STAT. / STATE
<2.2> SYNC / SYNC
1
MIMIC
<1.1> STAT. / SOURCES
<1.2> MET. / METERING
<1.3> INFO. / INFO
5
ALARMS
<5.1> ACT / ACTIVE
<5.2> FIN / FINISHED
6
I/O
<6.1> IN / INPUTS
<6.2> OUT / OUTPUTS
3
METERING
<3.1> SYS / SYS
<3.2> V / V
<3.3> U / U
<3.4> F / F
4
TIMERS
<4.1> RUN / RUNNING
<4.2> S1 / SOURCE 1
<4.3> S2 / SOURCE 2
<4.4> OPT / OPTIONS
<4.5> TOX / TEST
<4.6> EOX / EXT TEST
7
MAINTENANCE*
<7.1> AL1
<7.2> AL2
<7.x>
ALx
Visualization
- Short press on this
button to cycle the
dashboards.