manualshive.com logo in svg

hager HZI855, Инструкция по эксплуатации, Страница: 23 / 65

Поделиться
Скачать
hager HZI855 Скачать руководство пользователя страница 23

6LE007317A

23

10.2. Navigation Menu

The Menu on the display can be access with the Return/Menu button on the front face of the controller. It is structured in different 

chapters and is easy to navigate through it with the navigation pad. To select a screen use the navigation arrows         , then 

press the ok key   to validate the selected screen.

CONTROL

 - This menu allows to change the operation mode as well as to test position orders and engine start signals. (See chapter 10.6)

LOG

 - In this menu, the operator can see the list of past events, search an event by date, see the statistics of the ATSE and manage 

faults and alarms. (See chapter 10.7)

STATISTICS

 - In this menu, the operator can see number of cycles and several operating hours.

GENSET SCHEDULER

 - The operator can set 4 different customized engine start programs and schedule them in a cyclic or non-cyclic 

mode. (See chapter 10.8)

PARAMETERS

 - In this menu all the configuration parameters of the ATSE can be set, as well as timers, communication, alarms, I/O 

and display parameters. Passwords and specific functions can also be set in this menu. (See chapter 11.1)

SPECIFIC FUNCTIONS

 - All functions that are specific for the controller are inside this menu. See all the options in chapter 11.1.8.

MAINTENANCE

 - This menu is reserved for maintenance purposes (service team). (See service chapter 12)

ABOUT

 - The main information of the controller is showed on this menu: product serial number, firmware, communication address and 

the maintenance telephone to call for the service.
The Home screen (Main Menu) can always be accessed by long-pressing the   button from any other screen. 

10.3. Operating modes

The controller has 4 types of operation modes:

MANUAL (CTRL mode):

 it allows the user to take the control of the commands sent by the controller and the automatic procedure is 

totally disabled. 

To enter manual mode, click the Manual operation button:   

The LCD will prompt the user to enter the operator password. The Manual mode LED will light up and the manual operation buttons will 

be enabled. Select   to switch to source 1,   to go to source 2 and   to go to center off position (if existing).

NOTE: In manual mode, if a source is lost, the genset (if 

any) will start but the controller will not force a transfer. 

The purpose is to keep the supply of the control and 

the communications.

AUTOMATIC:

 in automatic mode the controller will take the control over the switching device according to the settings (operating 

range, timers, etc). 

To switch from manual mode to Automatic mode, make sure there are no external inhibitions to automatic mode (inputs, cover open, 

etc..) and click the automatic operation button: 

 

The LCD will prompt the user to enter the operator password. The automatic mode LED will light up.

The switch may transfer as soon as automatic mode 

has been enabled.

MAIN MENU

 

CONTROL

LOG

STATISTICS

GENSET SCHEDULER

PARAMETERS

SPECIFIC FUNCTIONS

MAINTENANCE

ABOUT

Содержание HZI855


































































Отзывы:

Нет отзывов