GSE Agrifeed 5500, Справочное руководство

Страница: 55 / 72

51
5.1.4 Advancing Ingredients
To manually advance ingredients:
Press [SELECT INGRED] . This records the loaded net weight of the
previous ingredient, deletes the ingredient from the loading list, then
waits for you to press
[START] to begin the loading process for the next
ingredient. It is possible to temporarily skip ingredients by pressing
[SELECT INGRED] before pressing [START] .
Pressing [STOP] during the loading process will record the weight
already loaded for the current ingredient, but will not delete it from the
loading list. Thus it is possible to load the remaining weight out of
sequence at a later time.
Pressing
[STOP] twice consecutively during the loading process aborts
the batch.
To advance ingredients automatically:
Enable the ADVANCE TOLERANCE parameter in the Scale Setup
mode. When the loaded weight is within the specified tolerance for the
amount of time specified by the ADVANCE DELAY, the next ingredient
is automatically selected. The weight of the previous ingredient is
recorded and the ingredient is deleted from the loading list.
To Advance Ingredients with Remote Key:
Disable the ADVANCE TOLERANCE in the Scale Setup mode and set
the REMOTE INPUT ACTION to ‘PRINT/ADVANCE’. Activating the
remote key will print a ticket and then advance to the next ingredient
similar to the automatic method.
5.2 Unloading Recipes
A pen number can be assigned to each location that a recipe is unloaded.
When using the AGRIDATA Recipe Management PC software, a pen
routing list can be created providing a driver with pen location and
unload weight information for multiple pens.
5.2.1 Selecting Individual Pens
To unload a recipe to a single pen:
1. Make sure the Agrifeed 5500 is in the UNLOAD mode – if it is
in the LOAD mode, press
[UNLOAD] .
2. Key in the unload target weight and press [UNLOAD] .
3. The display shows the batch target and prompts “Enter
PEN/ID:” .
4. Key in the pen number (optional), and press [ENTER] .
5. Begin the unload process (see section 5.2.3).