GSE Agrifeed 5500, Справочное руководство

Страница: 53 / 72

49
Section 5: Load / Unload Operation
The Agrifeed 5500 is capable of loading and unloading recipes by the
touch of the button. Also the indicator is also capable of loading a single
ingredient batch using a default recipe ‘RECIPE 00’.
5.1 Loading Ingredients
When loading, ingredients can be specified individually or recalled from
a recipe.
5.1.1 Selecting Individual Ingredients
To load ingredients individually:
1. Make sure the Agrifeed 5500 is in the LOAD mode – if it is in
the UNLOAD mode, press
[LOAD] .
2. Key in the ingredient target weight and press [LOAD] .
3. The display shows the batch target and prompts “Enter Ing#:” .
4. Key in the ingredient number (optional), and press [ENTER] .
5. Begin the loading process ( see section 5.1.3 ).
5.1.2 Selecting a Recipe
1. To load ingredients of a recipe:
2. Make sure the Agrifeed 5500 is in the LOAD mode – if it is in
the UNLOAD mode, press
[LOAD] .
3. Select a recipe to load as follows:
Key in the recipe number and press
[SELECT RECIPE] , or
View the recipe list by pressing [SELECT RECIPE] . Refer to
section 4.2 for instructions on accessing the recipe database.
4. Press [START BATCH] .
5. Enter the total recipe target value and press [ENTER] .
Consider the recipe’s Weight Entry Method:
WEIGHT/ANIMAL - Key in the number of animals to feed.
The target weight for each ingredient is automatically
calculated.
WEIGHT/LOAD – The total recipe weight as determined by
the individual ingredient targets is shown as the batch target.
Press
[ENTER] to accept this target, or key in a new target and
press [ENTER] . If a new target is entered, all ingredient targets
are adjusted in direct proportion to the new target (for this batch
only).