GSE Agrifeed 5500, Справочное руководство

Страница: 13 / 72

9
The seal will pass through two back panel screws as shown in Figure 5 .
Figure 5: Legal for Trade Sealing Method
2.3.2 Audit Trail
Three separate incrementing, non-resetable audit trail parameters are
used to indicate changes to various parameters, P60201 – OIML, P60203
– Calibration , and P60204 – Setup. An audit trail counter will increment
only once upon exiting the Setup Mode and saving changes regardless of
how many settings were changed.
With the indicator off, press and hold [CLR] key and turn power on.
Continue to hold [CLR] until " Macro Disbl " is displayed. Key in
" 60203 " and press [NET/GROSS] to view the calibration event counter,
or key in " 60204 " and press [ NET/GROSS ] to view the configuration
event counter. To return to the normal weigh mode from either parameter
"
60203 " or " 60204 ", press the [ZERO] key.
2.4 Wiring
A description of all wiring terminals is included on the bottom label of
the enclosure as shown in
Figure 6 .
Figure 6: Agrifeed 5500 Connector Label