GSE Agrifeed 5500, Справочное руководство

Страница: 50 / 72

46
Following the target entry, the display prompts for the selection of
another ingredient. Repeat the Ingredient Selection procedure for each
additional ingredient required. After all required ingredients have been
entered, press
[HELP] at the Ingredient Selection screen (without
selecting another ingredient) to exit and save the recipe.
4.3 Editing a Recipe
The procedure for editing a recipe is much the same as adding one.
When editing a recipe, it is possible to change the recipe name, pre-alarm
weight, ingredients and ingredient targets. Additional ingredients can
also be appended to a recipe. It is not possible to change the weight entry
method.
To edit a recipe from the weigh mode (see Figure 31):
1. Key-in the desired recipe number and press [SELECT
RECIPE] . The selected recipe number will appear in the
lower-right corner of the display.
2. Press [EDIT RECIPE] to display the Recipe Name Entry
screen.
3. Refer back to Figure 27 in section 4.2 Adding a Recipe to
continue the editing process.
Figure 31: Agrifeed 5500 Weigh Mode
4.4 Deleting a Recipe
If you wish to add another recipe but all 100 recipes have already been
configured, a message is displayed indicating that you must first delete
an existing recipe.
To delete a recipe from the weigh mode:
1. Press [SELECT RECIPE] .
2. Key in the 2-digit recipe number to be deleted and press [CLR] .
The display prompts “Delete Recipe?” .
3. Press [YES] to delete the recipe.
00
lb
Î
ο
Í
Gross
LOAD
Tare 00 lb
Recipe 01