GSE Agrifeed 5500, Справочное руководство

Страница: 34 / 72

30
INGREDIENT PRE-ALARM
000000 lb
KEY-IN PRE-ALARM VALUE
[ENTER]=Accept Value [CLR]=Delete
Figure 22: Ingredient Pre-Alarm Screen
NOTE:
If the
PRE-ALARM METHOD parameter in the scale setup is set to
“COMMON PRE-ALARM”, then the indicator disregards the Ingredient
Pre-alarm weight and instead uses the
PRE-ALARM WEIGHT
specified in the scale setup for all ingredients. See Table 6 for more
details on the Pre Alarm setup.
3.3.6.4 Deleting Ingredients
Deleting an ingredient does not remove the ingredient number from the
ingredient list; however it will clear the ingredient name and make it
unavailable for recipe configuration.
To delete an ingredient:
1. Access the Ingredient Setup as described in section 3.3.
2. Select the desired ingredient number as described in section
3.3.6.1.
3. Press [CLR] to display the DELETE INGREDIENT? prompt.
4. Press [YES] to confirm the intent to delete, or [NO] to cancel
deletion. The display will then revert back to the Ingredient
Selection screen.
3.3.6.5 Printing Ingredients
A list of all named ingredients can be printed from the Ingredient
Selection screen.
To print ingredients:
1. Access the Ingredient Setup as described in section 3.3.
2. Press [PRINT] . A list of all named ingredients will be
transmitted out the printer port.