Gree VERSATI III Series Скачать руководство пользователя страница 46

Страница: 46 / 135

Unit Control

★

At the function setting page with the unit turned off, by touching ―

Fast hot water

‖, the display panel

will go to the corresponding setting page, where desired option can be selected. Then by pressing ―

‖

this setting will be saved and the display panel will back to the function setting page.

[Notes]

：

●This function can be set to ―

‖ only when the water tank is available. When the water tank is

unavailable, this function will be reserved.
●It will be memorized upon power failure.

3.2.2.3 Cool + hot water

[Operation Instructions]

★

At the function setting page with the unit turned off, by touching ―

Cool + hot water

‖, the display

panel will go to the corresponding setting page, where desired option can be selected. Then by
pressing ―

‖ this setting will be saved and the display panel will back to the function setting page.

[Notes]
●When the water tank is unavailable, it will be reserved; when it is unavailable, the default priority will
be given to ―

How water

‖.

●It will be memorized upon power failure.

3.2.2.4 Heat + hot water

[Operation Instructions]

★

At the function setting page with the unit turned off, by touching ―

Heat + hot water

‖, the display panel

will go to the corresponding setting page, where desired option can be selected. Then by pressing
―

‖ this setting will be saved and the display panel will back to the function setting page.

[Notes]
●When the water tank is unavailable, it will be reserved; when it is unavailable, the default priority will
be g

iven to ―

How water

‖.

●It will be memorized upon power failure.

3.2.2.5 Quiet Mode

[Operation Instructions]

★

At the function setting page with the unit turned off, by touching ―

Quiet mode

‖, there will be a choice

box, where ―Quiet mode‖ can be set to ―On‖, ―Off‖, or ―Timer‖.

★

When it is set to ―

Timer

‖, it is also required to set the ―

Start timer

‖ and ―

End timer

‖. Unless otherwise

stated, otherwise time setting is all the same.

Timer for Quite Mode

★

3. This setting will be saved by touching the corner at the upper right corner.

[Notes]
●It can be set under both ON and OFF statuses, but will work only when the main unit is turned on.

Содержание VERSATI III Series








































































































































Результаты поиска

Содержание VERSATI III Series

Отзывы:

Бренды по названию

Популярные бренды

Gree VERSATI III Series, Руководство по обслуживанию

Результаты поиска

Содержание VERSATI III Series

Отзывы:

Бренды по названию

Популярные бренды