TIP
•
You can also specify the timecode by tapping the entry area of
[In:] and [Out:].
•
You can also specify the time lapse from the start point of
recording (duration) to automatically end the recording. Tap
[Fixed Length], tap the entry area of [Length:], and enter the
timecode.
5
Press the [Rec] button.
The recording starts at the specified In point. The recording automatically
ends at the specified Out point.
You can set the clip name by tapping the entry area of [Clip:] while recording.
To end the recording in the middle, press the [Stop] button.
After the recording ends, the recorded clip is saved in the bin selected in
step 3.
TIP
• The video currently recorded in the R1 channel can be loaded
and played on the P1/P2 channel.
Loading and playing back video currently recorded (chasing
playback)
• The video currently recorded in the R1 channel can be output
from the P1/P2 channel with active through.
Outputting currently recorded video with active through (E to E
mode)
•
To check the properties of the clip currently recorded, tap
[Menu] and then tap [Properties] on the 1ch view of the R1
channel.
•
To change the name of the clip currently recorded, tap [Menu]
and then tap [Rename] on the 1ch view of the R1 channel.
•
Markers can be added on a clip being recorded.
•
To unload the video after recording, tap [Menu] and then tap
[Unload] on the 1ch view of the R1 channel.
•
To set the clip name for next ingest file, tap [Menu] and then
tap [Set the clip name for next ingest file...] on the 1ch view of
the R1 channel. If the name of the clip to be recorded next has
been set in the R1 channel, the clip name setting for the next
recorded clip is prioritized.
Setting of ingesting dialog box
53
May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
Recording by VTR control (R1-VTR mode)
