Documentation HG G-73650ZD | English, Revision 05 | Date: 09.03.2017 | www.goetting-agv.com
79
Chapter 4: Software
2.
Subsequently, click on the
Upload Segment File
button.
The messages
Uploaded (XX%)
and subsequently
waiting for 10.10.10.20
should
appear briefly in the bottom left, whereby 10.10.10.20 is an example of the set network ad-
dress of the navigation controller (see section 4.4 on page 76). In the case of short files such
as with the test segments, the first message can become unnecessary.
If the message
waiting for 10.10.10.20
does not appear briefly, the file has not been
saved in the navigation controller which, for example, can be the result of an incorrect name
or missing password.
ATTENTION!
The navigation controller always saves only one segment file and always stores it internally
under the name
segmente.csv
. If a file with the name 'segmente…' is transferred and this file
contains no segments, the segments stored in the navigation controller are lost.
Note
It is therefore recommended to back up the segments saved on the navigation controller
beforehand on the PC (see below). The new segments are active immediately, i.e. the navi-
gation controller does not need to be restarted.
4.6.2 Download Segment File –> Transfer segment file from the navigation con-
troller into a file on the PC
Download Segment File
transfers the current segment file from the navigation controller to
the PC. Depending on the setting of the browser, the location on the hard disk where the file
is to be saved must be specified. Alternatively, it can be that the browser transfers the file
directly into its 'Download' folder without a prompt. As default, the file will have the name
segment.csv
, no matter what the name of the file was that was transferred into the naviga-
tion controller.
