Gossen MetraWatt SECULIFE ST BASE 25, Руководство по эксплуатации

Страница: 7 / 112

Gossen Metrawatt GmbH 7
4 Getting Started
➭
Read and adhere to the product documentation. In particular
observe all safety information in the documentation, on the
test instrument and on the packaging.
– See “Safety Instructions” on page 4.
– See “Applications” on page 5.
➭
Familiarize yourself with the test instrument.
– See “Test Instrument” on page 7.
– See “Initial Startup” on page 14.
– See “Operation” on page 16.
➭
Prepare the test instrument for use.
– See “Test Instrument Settings” on page 18.
– See “Extensions (enabling functions/feature)” on page 24.
– See “Connecting and Configuring External Devices” on
page 25.
– See “Inspector Management” on page 29.
– See “Internal Database” on page 31.
➭
Perform measurements:
– See “Connecting the Device Under Test” on page 38.
– See “Important Basic Information on Tests and Measure-
ments” on page 41.
– See “Single Measurements” on page 43.
– See “Special Functions – EXTRA” on page 74.
– See “Test Sequences (automatic test sequences)” on
page 76.
➭
Generate a report if required. See “Reports” on page 94.
➭
Transfer measurement data to IZYTRONIQ software if re-
quired. See “Transferring and Saving Test Structures and
Measurement Data (test instrument data base)” on page 95.
5 Test Instrument
5.1 Scope of Delivery
The scope of delivery varies depending on which test instrument
variant has been ordered, and is country-specific. Information
concerning the scope of delivery can be found in your order and
in the data sheet, in which all order information is listed.
5.2 Features
The test instruments are available with various features. These
can be selected when placing an order.
The basic test instruments include the following features:
* For voltage measurement, or for connecting a current clamp sensor for current
measurement or an AT3 adapter, and for temperature measurement via a Pt100
or Pt1000 temperature sensor
Key:

Included,

Optional
5.3 Symbols on the Test Instrument
The symbols on the test instrument have the following meanings:
IZYTRONIQ test software is required for some functions.
IZYTRONIQ may be included in the scope of delivery, for
example with standard models and instrument sets (see
data sheet).
If this is not the case or if you would like to take advan-
tage of a variant with a larger scope of functions, you can
purchase IZYTRONIQ separately. Detailed information is
available at:
https://www.izytron.com/
Install IZYTRONIQ to your system. All relevant informa-
tion, as well as information about the software, can be
found in IZYTRONIQ online help.
Note
Fe
atur
es
SECUTES
T
S
T
BASE
SECUTES
T
S
T
BASE10
SECUTES
T
S
T
PRO
SECULIFE S
T
BASE
SE
CU
LIF
E S
T B
ASE
25
Touchscreen / keyboard E01
  
10 A RPE test current G01
  
25 A RPE test current G02

2
nd
test probe H01
  
Voltage measuring input * I01
  
Integrated test sequences for
EN 50678 / VDE 0701,
EN 50699 / VDE 0702,
IEC 62368 / EN 62368 / VDE 868-1,
IEC 62911 / EN62911/ VDE 868-911
KE
    
SECUTEST DB+ KB01
    
SECUTEST DB COMFORT KD01
    
Bluetooth
®
M01
Antimicrobial housing —
 
250 V CAT II
Maximum permissible voltage and measuring cate-
gory between connections P1 (test probe), the test
socket and ground
Warning regarding dangerous electrical voltage
Warning concerning a point of danger
(attention: observe documentation!)
European conformity marking
The test instrument may not be disposed of with
household trash (see section 23 “Returns and Envi-
ronmentally Sound Disposal”).
Further information regarding the WEEE mark can
be accessed on the Internet at www.gossenme-
trawatt.com by entering the search term “WEEE”.
If the guarantee seal is damaged or removed, all
guarantee claims are rendered null and void.
!