GILES WOG-MP-VH Скачать руководство пользователя страница 2

Страница: 2 / 129

LIMITED WARRANTY

• Subject to the terms and conditions of this Limited Warranty as herein stated, all Giles Enterprises Inc. (here-

after referred to as “Giles”) food service equipment and parts purchased new from an authorized Giles rep-

resentative are warranted as to defects in material or workmanship for a period of twenty-four (24) months

from the date of installation, provided, however, that with regard to labor costs in connection with this war-

ranty, see below. All installations must be made by a qualified installing agency in accordance with all appli-

cable codes and/or regulations in the jurisdiction in which installed. Limited warranty coverage is extended

only to the original owner and is void if the unit is resold.

• During the Limited Warranty period, Giles will replace or recondition, at its factory, any part or parts of this

unit which Giles inspectors judge defective, provided the unit has been properly installed, subjected to nor-

mal usage, and operated and maintained in accordance with specified procedures. This Limited Warranty

does not cover cosmetic damage, and damage due to acts of God, accident, misuse, alteration, negligence,

abuse, or use of unorthodox repair methods. All parts replaced under this Limited Warranty carry only the

unexpired term of this Limited Warranty. Limited Warranty service may be furnished only by an authorized

Giles service representative.

• If Limited Warranty service is requested, Giles will dispatch factory-authorized service representatives to

inspect, repair, recondition, or replace units of its manufacture with such labor being rendered without cost

to owner for twenty-four (24) months from the date of installation. Otherwise, service, including labor and

transportation charges or other expenses, in connection with the removal or installation of any part or parts

supplied under this Limited Warranty, are specified on the original sales contract between the purchaser and

the authorized Giles representative.

•

Failure to use Giles OEM replacement parts and Giles OEM filters may void this Warranty.

• Giles reserves the right to change or improve its equipment and/or parts in any way without obligation to

alter such equipment or parts previously manufactured.

• Giles makes no further warranties, express or implied, including implied warranties of merchantability or fit-

ness for a particular purpose, and has no other obligation or liability not specifically stated herein.

• Repair or replacement as provided under this limited warranty is the exclusive remedy. Giles shall not be

liable for any incidental or consequential damages for breach of any express or implied warranty on this

product, except to the extent prohibited by applicable law. Any implied warranty of merchantability or fit-

ness for a particular purpose on this product is limited in duration to the duration of this limited warranty.

• Used Giles food service equipment or parts, or Giles food service equipment or parts not purchased from an

authorized Giles representative, carry no warranties, express or implied.

Содержание WOG-MP-VH


































































































































Результаты поиска

Содержание WOG-MP-VH

Отзывы:

Похожие инструкции для WOG-MP-VH

Бренды по названию

Популярные бренды

GILES WOG-MP-VH, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание WOG-MP-VH

Отзывы:

Похожие инструкции для WOG-MP-VH

Бренды по названию

Популярные бренды