GILES WOG-MP-VH Скачать руководство пользователя страница 10

Страница: 10 / 129

Model: WOG-MP-VH

Safety

•   The appliance must remain in an upright position.
•   Exercise care when removing the unit from shipping pallet.
•

DO NOT

operate the appliance, unless its components and their intended functions are fully understood (see

Section 3

). After reading and fully understanding

Section 3

, closely follow the presented procedures and

instructions in order to avoid equipment damage or malfunction.

•

To avoid personal injury, it is recommended that thermal hand protection (gloves or mitts) be worn while

tended the appliance

. Certain parts of the Fryer will become very

HOT

during operation; temperatures inside

cabinet may exceed

150°F (65.5°C)!

Exercise caution when operating and cleaning.

• Placing foods containing excessive moisture into hot oil, or attempting to load larger than recommended batch

sizes can cause a “surge boil” and result in an overflow of

HOT

cooking oil. Exercise due care when loading food

by observing how oil is reacting before continuing.

• Be sure the appliance is positioned in a stable, safe location with the casters in the locked position.

DO NOT

operate appliance if not secured. Some jurisdictions may require special anchoring for this type appliance;

check local code.

•

Allow the appliance to cool for 15-20 minutes before cleaning or servicing.

•

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental

capabilities, or lack of experience and knowledge, unless they have been given adequate instruction and/or

supervision concerning its use by a person responsible for their safety. Children should not be allowed to play

with, or around, this appliance.

• Prior to sale, cooked food products must be maintained at a minimum temperature of 150°F (65.5°C), or in

accordance with governing health regulations

.• Failure to comply with

CAUTION

notices may result in minor to moderate personal injury, damage to equipment

or property, and potentially void the warranty.

• Components exposed on the Control Panel surface are impact-sensitive. To avoid damage and maintain proper

operation, exercise care when working around or using carts/rolling tables near the appliance.

•

DO NOT

install the unit near combustible walls and materials. Failure to maintain safe distance may result in

fire.

• When cleaning the appliance:

- DO NOT

steam clean.

- DO NOT

use products containing chlorine, or other corrosive chemicals.

- DO NOT

use abrasive products, steel wool or scouring pads.

- DO NOT

use oven cleaners.

•

DO NOT

alter, add attachments, or otherwise modify this equipment!

• Failure to comply with

CAUTION

notices may result in damage to equipment or property, and void the factory

warranty.

Содержание WOG-MP-VH


































































































































Результаты поиска

Содержание WOG-MP-VH

Отзывы:

Похожие инструкции для WOG-MP-VH

Бренды по названию

Популярные бренды

GILES WOG-MP-VH, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание WOG-MP-VH

Отзывы:

Похожие инструкции для WOG-MP-VH

Бренды по названию

Популярные бренды