GILES GBF-35, Руководство по эксплуатации и обслуживанию

Страница: 47 / 104

41
Fryer Operation
GBF − 35 / GBF − 50 Fryers
4.01.7.1 Manually Operating Optional Basket Lifts (when equipped)
4.01.7 Additional Controller Features
Press the [BASKET] key once
Use keypad [ 2] UP • [ 8] DOWN key to select
raise or lower .
Press [CLEAR] to Cancel the operation .
Press appropriate key to select side
[4]=Left [5]=Both [6]=Right
Selected lift(s) will operate as specified.
4.01.7.2 COOL Mode
To exit COOL press the [CLEAR] key, then press [<4] to exit
­ OR ­
Press [CLEAR] again to continue with COOL mode.
When exited, temperature setpoint returns to the previous active value and fryer
enters
PREHEAT until temperature is reached. The STIR OIL alarm is issued when
setpoint is reached, as described in Section 4.01.2.
+
COOL Mode is an energy ­ saving feature that lowers the oil temperature setpoint value,
placing fryer into an idle standby state during periods of inactivity.
Press the
[COOL] key once to enter COOL mode. Temperature setpoint changes to the COOL
TEMP setting specified in user settings, see Section 4.01.8 .
Factory ­ set default = 275°F . The setting range is 200°F ­ 350°F .
NOTE:
▪ LIFT switch on control panel must be in the [LIFT] position.
▪ As a safeguard against placing product in oil that is not at the proper cooking temperature, manual operation of
lifts is disabled while fryer is in
PREHEAT mode.
▪ After a basket lift completes an operating cycle, it cannot be actuated again until the small red indicator above
the
BASKET key turns OFF, approximately 20 seconds .