GILES GBF-35, Руководство по эксплуатации и обслуживанию

Страница: 12 / 104

1. Carefully cut and remove the plastic stretch film, strapping and any other packing material.
2. Filter pan and fryer accessories (baskets, screens, fryer tools, etc) are either packed inside the fryer cabinet or
in the vat. Remove these items and set aside for future use.
3. Carefully remove fryer from shipping pallet. Fryers can be very heavy, especially multiple unit systems. Great
care should be taken when lifting or moving the unit to avoid personal injury or damage to the unit. Use of
appropriate material handling equipment is recommended when removing units from shipping pallet.
2.02 Unpacking & Uncrating − continued
IMPORTANT!
Damages to the unit caused by improper use of material handling equipment or poor work practices are not
covered by Giles’ warranty. Giles shall not be liable for personal injuries or property damage which may be
incurred during installation of this equipment.
Fryer installation is the sole responsibility of the purchaser, unless previous arrangements have been made in
writing.
Installation
6
GBF − 35 / GBF − 50 Fryers
2.03 Electrical Requirements
IMPORTANT!
If crated unit showed evidence of damage or mishandling, immediately inspect the unit and all accessory items
and notify the freight carrier of any damages. Generally, it is the purchaser’s responsibility to file and negotiate
claims for freight damage.
• Fryers must be properly grounded in
accordance with local code, or in the absence of local code, with the
National Electrical Code, ANSI/NFPA 70 . Improper grounding may result in electrical shock to users. Check local
electrical code to ensure that proper grounding is utilized.
• Always consult a licensed electrician, or other qualified technician, prior to installation to ensure that the electrical
circuits to which the unit is to be connected are of sufficient rating to handle the appliance load.
• The
GBF fryer is manufactured for the various electrical specifications shown in Table 2.04 . Check the serial/data
label attached inside the cabinet or to the rear panel to determine the proper electrical service required. A banked
battery requires a separate power supply for each fryer unit .