GILES GBF-35, Руководство по эксплуатации и обслуживанию

Страница: 48 / 104

42
Fryer Operation
GBF − 35 / GBF − 50 Fryers
4.01.7.3 AUTO − COOL Feature
4.01.7.4 BOIL OUT Mode
+
IMPORTANT!
After BOIL OUT MODE is completed, the controller automatically resets the temperature setpoint to 50 ° F. It must
be reset to a proper cooking temperature before the fryer will heat cooking oil for normal operation.
Fryer must be properly drained, rinsed and prepared for cooking after a Boil Out cycle. See Section 6, Cleaning.
After fryer has been properly prepared for a boil ­ out cycle, press the [BOIL] key while
controller is in PREHEAT state to start BOIL OUT Mode .
Temperature and time change to the BOIL TEMP and BOIL OUT TIME , respectively, as
specified in user settings, see Section 4.01.8 fryer begins heating the boil out solution .
Factory ‐ set defaults:
BOIL TEMP = 200°F ... setting range is 185° to 208°F .
BOIL OUT TIME = 30 minutes ... setting range is 1 to 45 mins .
When AUTO ‐ COOL feature is turned [ON] , fryer automatically enters COOL MODE when no cook cycles are started
within the amount of time as specified by the [AUTOCOOL TIME] setting in user settings (Section 4.01.8) .
Factory ­ default: [AUTOCOOL] = OFF • [AUTOCOOL TIME] = 30. TIME setting range is 1 ­ 510 mins.
Exit AUTO ‐ COOL same as COOL ... press the [CLEAR] key, then press [<4] to exit
• OR •
Press [CLEAR] again to continue COOL Mode.
Upon exit, the temperature setpoint returns to the previous active value and
fryer enters
PREHEAT until setpoint temperature is reached.