GILES GBF-35, Руководство по эксплуатации и обслуживанию

Страница: 46 / 104

40
Fryer Operation
GBF − 35 / GBF − 50 Fryers
4.01.6 Cooking Cycle General Overview
COOKING TEMPERATURE, NAME, COOK TIME, STIR OVERRIDE & FISH FILTER
settings are shown on the upper display. READY message indicates that cooking
oil is at proper temperature and fryer is ready for cooking.
When in
READY state, temperature setpoint will be shown on lower display.
After selecting a menu item preset, or manually entering a cooking time , start
the cook cycle by pressing the [START] key once.
You are then prompted to select basket side. Either or both can be selected ...
press appropriate key for choice.
When side is selected, controller enters COOK state ...
NOTE: Fryer will not enter COOK unless it was in READY state .
If fryer is equipped with automatic basket lifts and they are enabled , the
basket(s) will be lowered into cooking oil and the programmed cooking time
will begin counting down on the
lower display. If lifts are not installed (or not
enabled) , manually place basket into oil, resting it on support screen in vat
bottom.
The upper display indicates the side that is cooking, and displays the
temperature setpoint. Timer Indicators beside the lower display screen will
indicate which timer is displayed.
Two different menu items can be selected and started together as described in
Section 4.01.5.2 .
After selecting a second menu item preset (or entering different time), press the
[START] key once again and when prompted (there is now only one choice) ,
press the appropriate arrow key (<4 or 6>) to start the second timer. Lower
display and timer indicator will change to show the second timer.
When both timers are running, pressing the [TIME] key 2 times
will toggle lower display between timers.
x 2
x 2
To cancel a running cook cycle press the [CLEAR] key once, then press it again to cancel
­ OR ­ press [<4] to continue cooking.
STIR ALARM : When enabled, an alarm & display prompt is issued at a specified time during the cook cycle,
notifying operator to stir the cooking product. Stirring helps to promote even cooking & prevent pieces from
sticking together. The feature must be enabled in
user settings, Section 4.01.8 and a [%] parameter must be set.
[STIR ALARM %] = amount of elapsed cook time before the alarm sounds. e.g. [STIR ALARM %] = 60 , then during a
10 min. cook cycle, the alarm will sound after 6 mins. have elapsed.
Factory default: STIR ALARM ENABLE = ON • STIR ALARM % = 62 .
A menu item STIR OVERRIDE setting can override the [STIR ALARM ENABLE] setting, see Section 4.1.05.1 .
When the cooking cycle time is complete, an alarm will sound & a message “DONE COOKING ‐ (LEFT) (RIGHT) or
(BOTH)” is displayed, as appropriate. If fryer is equipped with basket lifts, basket is automatically raised from the
oil. Press [ALARM] key to silence alarm & fryer re ­ enters READY state, awaiting the next load of product.