2. Installation
2.01 Appliance Location
DO NOT MODIFY, ADD ATTACHMENTS OR OTHERWISE ALTER THE UNIT WHILE IT IS BEING
INSTALLED.
GBF
−
35 / GBF
−
50 Fryers
Installation
5
2.02 Uncrating & Unpacking
Fryer is shipped on a wooden pallet; secured with high
tensile plastic strapping and enclosed by a wooden
framework. The entire unit is wrapped in plastic film stretch wrap.
• To avoid possible damage, the appliance must remain in an upright position while uncrating.
• Exercise care when removing the wooden framework from the shipping pallet.
• A single unit is
heavy ... multiple well systems are very heavy
. Use extreme care and appropriate handling
equipment and/or sufficient manpower when lifting or moving the equipment from pallet.
• Failure to comply with these
CAUTION
notices may result in minor or moderate injury, equipment or property
damage, and void the factory warranty.
Continued on Next Page
The following sections explain procedures for properly installing and preparing the appliance for use. To help avoid
personal injury or damage to the equipment, please adhere to all recommended procedures.
IMPORTANT! All material and labor expenses incurred during installation are the sole responsibility of the customer.
Generally, it is advisable to engage the services of professional commercial kitchen equipment specialists, a licensed
electrician, and/or a qualified HVAC contractor to manage the specific details of the installation. Please call Giles
Technical Support @ 800.554.4537, if assistance is required.
1. Appliance and surrounding area must be free and clear of combustible materials. Maintain 3” [7.6 cm]
clearance.
2. Provide adequate space to allow access for future servicing and proper operation.
3. Be sure that electrical service available in the intended location is a circuit adequate for powering the
appliance load.
NOTE:
A banked unit system requires a separate electrical service for each fryer well
.
4. Be certain the unit is installed in a stable position and will not move unintentionally. Front casters have
locking wheel brakes ... be sure they are kept locked when operating the fryer. Some code officials may
require that special anchoring be utilized for this type of appliance ... check local code. An eye
bolt is
attached on the rear of the fryer cabinet for this purpose.
5. The appliance must be installed, operated, and maintained in accordance with the
Standard for Ventilation
Control, and Fire Protection of Commercial Cooking Operations, NFPA 96
. Ventilation must be provided to
eliminate grease
laden cooking vapors, as required by local code requirements.
These steps will help to ensure proper installation. If there are questions concerning these procedures, contact
Giles
Technical Support
at
800.554.4537
or email
.
Содержание GBF-35
