GETINGE GROUP Maquet SERVO-s VENTILATOR SYSTEM V7.0, Руководство пользователя

Страница: 9 / 185

Do not modify or remove any original
parts.
Do not cover the ventilator in any way,
since the functioning of the equipment
may be adversely affected.
When the ventilator is used for MCare
Remote Service, use only network
equipment that is safe and in compliance
with the relevant electrical and EMC
standards such as IEC-60950.
Note: The network cable is excluded
from this requirement.
Always disconnect the network cable
before starting ventilation when the
ventilator is used for MCare Remote
Service.
Positive pressure ventilation can be
associated with the following adverse
events: barotrauma, hypoventilation,
hyperventilation or circulatory
impairment.
The SERVO-s Ventilator System is not
intended to be used during radiotherapy,
since this may cause system malfunction.
The SERVO-s Ventilator System must not
be used in a hyperbaric chamber.
The SERVO-s Ventilator System must not
be used with helium.
Only accessories, supplies, and auxiliary
equipment recommended by MAQUET
should be used with the ventilator
system. Use of any other accessories,
spare parts or auxiliary equipment may
cause degraded system performance
and safety.
The power supply cord must be plugged
directly into the mains power outlet
without the use of any multiple socket
outlets. If a multiple socket outlet is used
together with other products, total
leakage current might be exceeded at
earth fault.
SERVO-s VENTILATOR SYSTEM V7.0, User's Manual
9
| Introduction | 1 |