Manualedelleistruzioni per l’uso
Document code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
5
18
00
23/07/13
23/07/13
7.4. CLEANING
Workers must be informed by means of clearly visible warning notices.
The following section describes
cleaning
operations that can be performed by
maintenance
technicians.
Normally, certain cleaning operations
can be performed by the machine operator
, i.e. normal
operations on the outside of the machine, calling for the use of simple personal protective equipment.
Cleaning operations of the internal machine parts
must be performed by the maintenance service.
To avoid the inadvertent and dangerous activation of the machine, or inappropriate modifications of any
nature (also involuntary or accidental), cleaning should ideally be carried out by the same person that
operates on the machine, rather than by cleaning contractors who are unable to provide guarantees in
relation to compliance with these prescriptions.
Cleaning operations must only be performedafter disconnecting Genny from its external energy
(AC) supply
Never use petrol, solvents or other flammable and/or corrosive fluids to clean the machine, its
components, and the electrical equipment.
Use only type-approved non-flammable and non-toxic trade solvents.
Comply with the methods of use, and employ all the necessary personal protective equipment specified
by the supplier of such substances.
The machine, its components, and the electrical equipment must never be washed with water jets
Do not use a power washer or high-pressure hose to clean your machine.
Do not allow water to get into the Charge Port.
Do not clean the Tires with any specialized cleaners. Use of such products may reduce traction.
