Genny Mobility GENNY 2.0 URBAN, Руководство пользователя

Страница: 50 / 121

Instruction Manual Genny 2.0
Urban(English)
Document code Pag. of Rev. SAVE DATA PRINT DATA
03-09-12_UIMG2 Manual ENG 46 46 01 23/07/13 23/07/13
RIDER OFF
You do not have to be riding Genny 2.0 for the Stick Shake Warning to occur. The Stick Shake Warning
occurs if the Genny 2.0 is moved too quickly while in Balance Mode without a rider on board (or with
Genny 2.0 in Balance Mode after the rider has come off the machine). The Stick Shake Warning also
occurs if the Wheels spin as you pull Genny 2.0 along with you.
The table lists possible causes of the Stick Shake Warning and recommended actions to take when the
Stick Shake Warning occurs with no Rider on Board (the rider detect sensor is not activated).
Possible causes Recommended actions
Moving the machine too quickly with no rider on
board while in Balance Mode.
When moving your Genny 2.0 in Riderless Balance Mode, you
must move slowly and carefully. Always keep the Genny in
front of you
EMPTY BATTERY CONDITIONOF THE SELF-BALANCING UNIT
Genny 2.0 notifies the rider of a pending empty Battery condition before starting a Safety Shutdown.
An unhappy face icon displays on the InfoKey Controller, Genny’s speed is limited, Genny emits a warning
tone.
Whenever there is a notification of a pending empty Battery condition, come to a controlled stop before the
Safety Shutdown begins.
The table shows the InfoKey Controller icon that displays when a pending empty Battery notification occurs
and describes the recommended action you should take.
Display Icon Description Recommended action
The system has detected and
notified you of a pending empty
Battery condition.
Come to a controlled stop before the
Safety Shutdown begins. Do not resume
use of your Genny until you have charged
the Batteries.
EMPTY BATTERY CONDITION OF THE STABILIZING UNIT
The Machine notifies the rider of a pending empty battery condition showing a led illuminated stripe near the
command buttons that activates the stabilizing parking legs.
In some cases, old, cold, heavily used, or poorly maintained Batteries may develop a high resistance
condition. This can cause a pending empty Battery condition to occur even if the Batteries were recently
charged.