Manualedelleistruzioni per l’uso
Document Code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
19
31
00
23/07/13
23/07/13
TRIPS
Trips occur when the machine’s Wheel or Powerbase encounters an obstacle or terrain change that prevents the machine
from moving, bringing it to an abrupt stop and potentially causing a fall.
Avoid holes, curbs, steps, and other obstacles.
Avoid riding over too irregular or bumpy surfaces where the bottom of the machine may strike the bumps or any
object.
Use caution when riding over any terrain change such as pavement to grass, or over a threshold or speed bump.
TIPS
The machine balances front to back but not side-to-side.
You are responsible for maintaining side-to-side balance by leaning into turns. If you fail to actively maintain this side-to-
side balance, the machine can tip sideways and fall.
Avoid riding across steep slopes.
Lean into turns and lean uphill when riding across gentle slopes.
Keep the LeanSteer Frame vertical when riding across a slope.
Avoid turning on slopes or ramps.
Never let go of the Handlebar when riding across a slope. The Machine will turn downhill and you could lose your
balance.
Stay centered on narrow sidewalks or elevated paths.
Avoid turning when maneuvering backward.
Make sure that one Wheel does not drop off a curb.
